Block Designer

Tutorial

Learn the basic loop in 7 short lessons.

  1. 1 The canvas Pan, zoom, grid, and the block palette.
  2. 2 Place & wire blocks Place a source → low-pass → scope; auto-routed wires.
  3. 3 Edit parameters Select a block, change a value, live validation.
  4. 4 Open an example File → Open Example (Blinky).
  5. 5 Simulate Press Run and watch the workflow.
  6. 6 Read the scope Signal Monitor traces + eigenvalues / root locus.
  7. 7 Flash to hardware Program an STM32; watch the board LED blink.